 |
Non-Destructive Testing Chemicals are extensively used as one the most reliable and economical method of Non-Destructive Testing method for the detection of very minute surface Cracks, Pinholes, deformities in all types of structural & welded steels, Boiler tubes, Condenser tubes & Turbine & Power Generation Equipments. This method of testing is used on sight, as well as on the shop floor & is independent of shapes / curves of the substrate.
Liquid Red Dye Penetrant Chemicals are extensively used as one the most reliable and fairly economical method of Non-Destructive Testing method for the detection of very minute surface Cracks, Pinholes, deformities in all types of structural & welded steels, Boiler tubes ,Condenser tubes & Turbine & Power Generation Equipments. This method of testing is used on sight, as well as on the shop-floor & is independant of shapes / curves of the substrate.
Liquid Red Dye Penetrant Chemicals are formulated so as to penetrate in the minutest of the cracks/ Pinholes, by an excellent capillary action and shall have the sensitivity to detect all the cracks / defects completely. Red colour of the penetrant, which is adsorbed in the cracks / pinholes, is then blotted by the spray of the developer, thereby giving a high degree of contrast against white developer background and the colour is very easily distinguishable.
A very small residual amount of sulphur or chlorine even at ppm levels, is highly objectionable on surface. This is especially applicable to the equipment used for the Nuclear Applications. Our products in this range of Dye Penetrant Testing are manufactured so as to sufficiently free of these elements to render them acceptable. Our chemicals, Red Dye Penetrants, Developer & Cleaner confirm to the requirement of IS 3658-1981 IS 12889 & ASTM - E-165 - 80
Range of Products : For Dye Penetrant Testing
Promtech Dye Penetrant PM – 10Promtech Developer PM –24Promtech Cleaner PM 30
All available in 1 Lit & 5 Litres Packing and in 425 ml Self Spray Aerosol Cans.
Range of Products : For MAGNETIC PARTICAL Testing
Promtech Black Magnetic Particle Ink Spray, available in 425 ml Self Spray Aerosol Cans.Promtech White Contrast Paint, available in 425 ml Self Spray Aerosol Cans.
Tested & approved by National Test House Mumbai as confirming to IS 3658-1981 IS 12889 specns. These products also confirm to the requirements of ASTM E 165 80, Mil 25135 / 6866 & ASME Sect V.
|
