Gasket Remover
Home  Gasket Remover
Promtech Gasket Remover is an aerosol product designed to remove all types of gaskets and gasket residues from any type of metal housing, Pipe Joints; Flanges, Nut Bolts, Engine Housings. Our Gasket Remover Spray will also remove chemically formed-in place gaskets. We have carved a niche as one of the prominent Gasket Remover Chemicals Manufacturers based in India.
Packing : 400 ml Aerosol.
Shelf Life : ONE Year.
Promtech Gasket Remover Spray is CFC FREE, RoHS Compliant, extremely user friendly. Propellant : Hydrocarbon.
Promtech Gasket Remover is an aerosol product designed to remove all types of gaskets and gasket residues from any type of metal housing, Pipe Joints; Flanges, Nut Bolts, Engine Housings. The product will also remove chemically formed-in place gaskets.
Product Benefits
- Penetrates and cleans intricate shapes
- Will not run, even on vertical surfaces
- Eliminates excessive scraping and potential damage to flanged surfaces
- Excellent Maintenance product. Saves time and labor
Most ideal during yearly / Periodic Shut down & Periodic Maintenance
Typical Applications
Removes baked-on gaskets and gasket cements
Removes formed-in-place gaskets
Removes gaskets from aluminum without scraping
Removes gaskets from small, difficult to reach areas
Directions for Use
- Provide adequate ventilation.
- Protect painted and non-metal surfaces from overspray. The product will remove paint.
- Shake can well. Note: The product does not require a ball agitator. For best results, the aerosol can should be at room temperature before spraying.
- Holding can 8 to 10 inches from the surface to be cleaned, press the nozzle and spray the product onto the old gasket.
- Allow to set 5 to 10 minutes. Remove dissolved gasket with a putty knife. Repeat if required.
For Cleanup
Turn can upside-down and spray to clear nozzle.
Clean hands with hand cleaner Gels / Soap Waters.
|
Properties of Material : Typical Value
| Chemical Type | Petrochemical Solvents, Gelling Agents, Wetting Agents, Stabilizers etc. | | Appearance | Clear to opaque, Hazy liquid. | | Odor | Solvent | | Flash Point | Aerosol, contents under pressure, consult MSDS | | NFPA 704 Flammability Rating | 4 (Highly Flammable) | | Storage Instructions | Store the cans in cool, Dry, Covered place, below 450C |
General Information : This product is not recommended for use in pure oxygen and / or oxygen rich systems. For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
Who should use this Product : Automobile Industries/ Auto Workshops / Show-rooms / Large sized Chemical / Petrochemical, Pharmaceutical, Cement, food & beverages, Boilers, heat Exchangers mfg; Petro-chemical Refineries, Steel & Tube rolling Mills, Off-shore construction, All Engineering Industries, Genset & Engines Manufacturers & Repairs shops, Ship Building and Ship repairs, Power Generation / Distribution Industry, HVAC, Water, Steam & Chemical pipelines; sewage & Slurry Pumps.
Storage : Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 to 28C (46 to 82F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range.
Note : The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. Promtech Chemicals Pvt Ltd disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Promtech Chemicals Pvt Ltd products and disclaims any liability for consequential or incidental damages of any kind, including lost profits.
|
|
|
|
